To display the tank inventory for all tanks, use the command PRINT TANK or P TA. The terminal will display the tank number (T#), total quantity (Totals), and reorder level.
In addition, if a CFN-compatible tank monitor system (electronic tank gauge) is installed on the tank and connected to the Site Controller, then the measured tank quantities and tank ullage will be displayed. Ullage is the amount of remaining space or unused capacity in the tank.
| PRINT TANK (P TA) R* PRINT TANK | ||||||||
| T# | Product | Total | Reorder | Gauge | Diff | % | Temp | Ullage |
| 1 | Regular | 5000.000 | 5000.000 | 4995 | 5 | 0.1 | 65.2 | 5005 |
| 2 | Unleaded | 6240.000 | 5000.000 | 6240 | 0 | 0.0 | 65.2 | 3760 |
| 3 | Diesel | 19840.000 | 8000.000 | 19844 | 4 | 0.1 | 65.2 | 156 |
| 4 | Premium | 10000.000 | 5000.000 | 9999 | 1 | 0.1 | 65.2 | 1 |
| R* | ||||||||
T# Tank number of tank.
Product Name of product stored in tank.
Total Inventory quantity in tank.
Reorder Reorder level at which a warning message will be logged.
Gauge Measured quantity in tank according to tank monitoring system (TMS).
Diff Difference between inventory and measured quantities.
% Difference expressed as a percentage over or short.
Temp Measured temperature as reported by the TMS. Used by the TMS to compute temperature-corrected gallons.
Ullage The amount of usable empty space remaining in the tank.